Double Glazing Seal Repairs
If the seals of double glazing windows are broken they could cause damp and mould. This could cause damage to the frame and walls surrounding it, and also impacting your health.
Fortunately, the majority of uPVC windows can be repaired by resealing, rather than replacement. A glazier will clean the frame and glass of the window, apply a new bead, and smooth it.
Water Leaks
Window seals are made to prevent moisture to be kept out of your home. However, when they begin to break down, it can cause water leaks around your windows. Not only is a leaking window unpleasant, but it can cause expensive structural damage to your home's structure. It is essential to recognize the issue early and get it repaired by an expert before it gets worse.
Often, the source of your leaking windows isn't in the glass itself, but on the frame and sill. This is the most typical indication of a failed seal. It can be caused by damage to the window seal as a result of weather or aging, worn-out caulking or even an obstruction to drainage that results in a build-up of water or ice.
Another sign of a failing window seal is the appearance of water between the panes of your double glazed windows. While this isn't quite as risky as a leak, since the water doesn't travel enough to reach your home. It does mean, however that the inert gases that are trapped between your windows have escaped out. This can lower the insulation value of your window.
Condensation in between the panes is another typical sign of a leaky seal. This could be due to an ineffective seal or a damp atmosphere within your home. It could also be due to a issue with the glass. It's not just a nuisance, but the condensation can result in mildew and mould growth within your home. This can be difficult and expensive.
If you're seeing these indicators, it's the time to have an examination of your double-glazed windows. Replacing or repairing your windows will help protect your home against water leaks, reduce the cost of energy and eliminate draughts. It's a small cost to pay for the comfort and safety of your family. Contact Thompson Creek Window today to discuss your options for window seal repair or replacement. Our skilled professionals are here to assist! We offer assistance to homeowners in the Mid-Atlantic region.
Condensation
A broken double-glazing seal can allow water to enter the space that is used for insulation. This water could cause fogging or misting in the window panes.
If you notice condensation developing inside your home it's time to call in an experienced double glazing repair service. The condensation is a sign that the vacuum seal drawn by the factory has failed and moisture is seeping into the gap between the insulated and non-insulated.
Condensation can be caused by a number of factors but it is most commonly a result of faulty gaskets or sealants, or insulation in the uPVC frame of the windows. In the end there are different double glazing repair options, but it is crucial that the new seal is properly designed to ensure a perfect fit and a water-tight seal.
Gaskets are generally composed of polyurethane, which is a material that can be used to seal gaps between double-glazed units. These are designed to last a long time but they can perish over time due to natural wear and tear as well as exposure to various temperatures and weather conditions throughout the year.
Over time the foam will shrink or crack. This results in a crack in the seal, which allows moisture to get into the double-glazed windows. This can result in condensation and a loss in energy efficiency.
Re-sealing the windows is one option to address this issue. This is not a guaranteed solution since it will only remove the existing condensation, and not address the underlying problems that are causing the double-glazed window to leak or form condensate.
A professional who is able to provide an insurance-backed guarantee must replace your windows in full. This means that if the company fails or goes under, you'll still be protected by the insurance. It's important to note that the warranty on windows replacements should be at least 10 years.
Misting
Check that your double-glazing seals are in good working order as the fall season approaches. Window seals that are worn-out can impact the properties of your windows' insulation as well as cause condensation, mold and dampness. It's important to fix any issues with your double-glazed windows as soon as possible to avoid further damage and save money on energy costs.
Double-glazed windows are made of two glass panes which are held together by a gas-filled inner space. The outer sealant layer fills in the gap between the uPVC frames and the glass. double glazing window repairs is vital to ensure the air-tight sealing that keeps warm and cool air from your home which will save you money on heating costs. Unfortunately, over time these seals can break down due to ageing or weather conditions, or even poor installation. The encapsulation formula that makes double-glazed windows so effective can begin to deteriorate when this occurs.
If seals that are damaged or broken are not fixed they can cause condensation and dampness which can affect your health as well as the appearance of your window. Damp and mould not only cause damage to your floors, walls and ceilings, but also cause irritants and allergens in your home that can be harmful to you and your family's health.
One of the most frequent problems that can happen to your double glazing is misting in between the panes. This occurs when moisture is able to get into that insulated section of your window. It can be very difficult to fix without professional double glazing seal repair.
DIY solutions to this issue are available, however, we advise against them as they can be messy and cause damage to your windows. These methods involve drilling holes into your glass unit and then using chemicals to get rid of fog and condensation. This can cause many problems, most notably exposing your windows to water damage that could cause the entire unit to be destroyed.
Professional glaziers have the tools and skills to properly reseal uPVC frames. They can also offer you long-lasting results. Not to mention they can also give suggestions on the best way to keep your windows in good condition to prevent any future problems.
Draughts
A draft that is coming from your window is a sign that the sealant may have deteriorated. It should be repaired or replaced. This will prevent cold air from entering your home. It will also increase the efficiency of your energy, reduce heating costs, and improve comfort.
It is also important to remember that not all drafts originate from the window seals but rather from the gap between the frame and bricks. In some cases it may be possible to fix this by caulking the gap. However, if this is not successful, the area will require resealing professionally.
When the sealant on double-glazed windows begins to break down and allows water to infiltrate. This can result in dampness or even mold. This could affect your health and may be detrimental to the property. If you find any issues with water ingress and you want to take action promptly. If your windows are covered by a warranty, it's worth checking to find out if the company that supplied them will be able to cover the cost.
It is important to determine if the windows are covered under warranties. Certain companies offer lifetime warranties, while others only cover 10 years. If your double-glazed windows are under warranty, it's worth contacting the company you purchased them from as soon as you can and providing them with details of any issues that you're having. Ideally, it is best to do this in person, or via mail or email, to ensure that all information is documented and clear.
It is important to note that draughts can often be caused by faulty hinges rather than the absence of seals that are effective. The hinges are responsible for closing the window sash (the section that you open) but can become stiffer in time if not regularly oiled. This could leave a gap between the frame and the sash, which can let cold air in. This problem can be solved by replacing the hinges, without damaging window seals.